DIY Halloween Costume: The Black Knight

in , , , , , , , , , ,
"T'is but a scratch"

Having shown his warlike tastes by spending his previous Halloweens as a ninja, a War of 1812 ship captain and a Revolutionary War drummer boy, my son decided he would be something humorous last year - the black knight from Monty Python and the Holy Grail. That was the character in the rather bloody scene where King Arthur discovers his path blocked by a knight who refuses to stop fighting even after all his limbs are cut off. I figured with black jeans, a belt, and a black hooded sweatshirt, this wouldn't take too long to make. I already had a nice big Lord of the Rings plastic greatsword for him to use while he still had his arms, so all he was really going to need was a surcote and a helm after I convinced him he was not going wear one of my real helms from my days in the Society for Creative Anachronism.

Materials for costume for 10 to 12 yr old
Two 22"x40" rectangles of black fabric
9" square of red fabric
3 black craft foam sheets
red and white acrylic paint (acrylic gloss is optional)
x-acto blade
glue gun
masking tape
fabric adhesive spray
sewing machine
ruler

Sew the shoulders of the black fabric together, leaving a nice wide openning for the head and neck. I also sewed a pleat on either shoulder, so the surcote wouldn't hang over my son's arms too much. I cut out two triangular flaps and my son painted the bloody stumps, which turned out well and as his friends remarked admiringly, "Really gross." It took a day to dry, and then I also brushed it with some acrylic gloss. These flaps I sewed underneath the shoulders, so my son could tuck them in or out, depending on when he wished to be armless.
I screen captured the boar on the chest of the black knight's surcote and hand drew it onto the red fabric. Any one could enlarge the picture below instead. I then cut it out, sprayed the back with the fabric adhesive and machine appliqued it to the front.
The helm was made with 3 pieces of black craft foam. The back piece measured 12" wide by 8.5" high. The front piece was 14" wide and came to a point below the chin at 10.25", while it was 8.5 at the sides. I marked the eye and air slits from the back and cut them out with the x-acto blade and a ruler.
The top was an 9" by 7"oval.
I used masking tape to hold the parts together and then made things a lot more permanent with a glue gun. I also cut little circles of foam to be the rivets. I was going to spray it silver but my son liked it the way it was, & so it was done. A nice light helm, good for running about in at school and while trick or treating.
"NONE SHALL PASS!"

Jody



Forward to Fall with The {New New}

in , , , , ,

Craft in Bermuda

in , , , , , ,
This summer, I decided to do something for vacation that I've never done before. Ok, so it's not terribly uncommon on the whole, but for me, it is absolutely uncommon. You see I'm a fly by the seat of my pants kind of gal - don't like being cooped up in any one place on a trip. I'd rather explore on land, and see and meet the locals, than be on an invisible leash. But not this time. This time I went on a cruise.

4 days out to sea, and 3 days in Bermuda. I won't bore you with the details because all I really want you to know about is this:

A little shop called Dockyard Glassworks. The shop is conveniently located within walking distance of where the cruise ships dock (I know what you're thinking: "tourist trap"!)

Ten years ago, the owners of Dockyard Glassworks decided to collaborate in order to open their art glass business. Since then, they have been producing art glass for sale locally and to export.

Perhaps the best thing about Dockyard Glassworks is not only the unique items for sale, but rather that you can watch the glass artisans at work! For more info, visit http://www.dockglass.com/



by Lorina Pellach-Ladrillono of The Original Beadscarf and beadscarf.etsy.com

Crafts and Craft Selling for Kids

in , , , , , ,



Crafts & Craft Selling for Kids

If you are a crafter parent it won’t be long before one of your children asks, “Can I make things to sell too?” Then your quandary is, what can a child make that actually looks good enough to go in your shop or display? Fine craftsmanship is not exactly something your average ten year old is capable of. My daughter tried making pins in felt, which were adorable but were too much work for the price point they would sell at. She tried crochet, but couldn’t master anything beyond a chain. Finally what worked was “Jessamyn’s Button Hairbands,” which consisted of large cloth covered buttons (re-using fabrics from thrift shops) with elastics tied to the shanks on the back. Moreover, making them was a process she could do virtually by herself. I bought the supplies, designed her card, and she pays me back 50 cents for every button she sells. And she does very well--selling them at fairs at a low price point, yet earning enough to be the envy of all her friends.




Here is another idea for kids wanting to earn their keep, or like mine, to sustain their addiction to Pokemon cards.

Recycled Bag Tags & Bookmarks

Supplies & Tools:
Old Magazines
Scissors
Glue Stick
Paper Cutter
Mylar or Acetate sheets or any kind of flat, clear plastic
Colored paper (if for business it should be non-fading)
Laminating Sheets
Hole Punch
Plastic Lanyard or other string or yarn


Let the kids go through the old magazines cutting out all the headlines that are over 3/8” tall. Remember the letters must fit comfortably on a 1.25” strip of paper. If this will be for a “business” they can cut out all the letters individually and put them in marked envelopes for each letter, number, and one for symbols. Some of these headlines were funny enough to use all by themselves, come to think of it.





Using the paper cutter, cut 1.25” wide strips of colored paper (I had old scrapbooking paper the kids had been cutting up inefficiently for the last 6 years) or magazine pages with great color or texture for the background. If you don’t have a paper cutter you can use a scissor but the rolling cutter is more efficient and far safer than things like x-acto blades.



Now they can choose the letters they will use. Names are good, as are cool phrases and sports. Run the glue stick along the length of the strip of colored paper. Arrange the letters and press into the glue. Leave room on one end for a hole if a lanyard will be attached.




Cut a larger strip of acetate and glue the back of the colored paper onto it, so the tag will have some firmness. (We actually used the heavy plastic from a box of Pokemon cards for the strips, so we felt very virtuous and green.) Cut a strip of laminating paper and use it to carefully seal the front of the tag to the acetate, leaving at least 3/16” extra space all around the colored paper. This is undoubtedly the trickiest part of the whole process and your kids will need some practice to master it. You need to fold back just a corner of the laminating paper and then position it atop the tag. Then you slowly peel off the backing while smoothing it down at the same time, starting from that first corner. With the paper cutter trim the sealed edges. Punch a hole (you will need a good quality hole puncher, like McGill or Fiskars, available at craft stores) in the tag and add a lanyard or string.


The fun, hip, professional looking results can be used as a bag tag, a book mark, a backpack decoration, a necklace, a party favor, a seating tag, and I've even been thinking, earrings, if you want to work really, really small. The process can be used for children’s parties, school fair fundraisers, for starting your child’s own Etsy Shop, and of course, a few hasty Father’s Day gifts.



Jody Lee






The Bounty of Summer

in , , , , ,
It is less than a week until summer officially starts which means that it is time to hit up the New York City Greenmarkets and revel in the produce of summer. Soon there will be corn as far as the eye can see, which is just fine by me.

Here are some {NewNew} members who can help you in your quest for the perfect pint of fresh berries and vegetables:


Cherry Necklace from pulp sushi


Artichoke Notecards from Blue Stitch Books


Strawberry Swarovski Earrings from Mulry Jewels


Tea and Cucumber Soap from Dirty Loves Clean


Cherry Basket Cards from CLine Creations



--Lisa
pandawithcookie.etsy.com

How-To: Re-Purposed Pants -- The Yoga Sling Bag with 2 Pockets

in , , , , , ,
I’ve yet to find a yoga sling bag to tote my yoga mat around that will suit my needs at a reasonable price! I want one with pockets for a MetroCard, some cash, and keys. It should be comfortable to carry, have a little extra room for a small towel, and not cost 50 bucks!

So I have these cargo pants that I haven’t worn in a while and decided that they will make a GREAT bag to carry and store my yoga mat. AND I can incorporate the pants' pockets in the redesign! You can make one too, and here’s how…

You’ll Need:

An old pair of pants or jeans
A good pair of scissors
Sewing machine (preferably)
Webbing (for the sling strap)
Shoe lace or other means to close the bag

How To:

1. Fish out an old pair of jeans, preferably boot-cut and big enough to fit your rolled up mat. It should have a little wiggle room, but not be too roomy.

2. Cut the pants/jeans in half so that the two legs are separated. Turn the half you will use inside out.3. This is how to cut up the pants if you want to use the button fly as the opening for the yoga mat sling bag.4. Sew the button fly back onto the pant leg.

5. Next, put the yoga mat into the pant leg to measure how long the bag should be. The top of the yoga mat should sit where the waistband meets the pant leg. Cut off the bottom portion of the leg. You can use this remnant for the base of the bag.


6. Measure the diameter of the pant leg bottom. Using the leftover pant leg fabric from Step 5, cut out a circle with the same diameter plus a 2 inch seam allowance. This will become the base for the sling bag. I traced a circle around a cordless electric kettle for a perfectly shaped base.

7. With left sides facing out, pin the circle to the bottom of the pant leg. Decide where you want the strap to run across the bag and position one end of the webbing between the base and the pant leg.

To recap, the pant leg should be turned inside out with the left side facing out and the webbing should be inside (touching the right side) of the pant leg with one end positioned between the circle base and the pant leg.

Sew the base to the pant leg with 2 or 3 seams to attach the strap and the base securely to the sling bag.
8. Turn the bag right-side out. Secure the loose end of the webbing by sewing it to the opposite end of the bag with an “X-shaped” seam.9. To create a drawstring closure at the top of the bag, carefully cut two slits in the exterior part of the pants' waistband. Do not cut all the way through the waistband! Pull a shoelace or other heavy string through the waistband "tunnel." Pull the ends of the drawstring tight to tie the bag closed.10. If you are so inclined, go ahead and embellish the pocket with an “ohm” for extra credit :)
You’re ready to go!By Lorina Pellach-Ladrillono of The Original Beadscarf and beadscarf.etsy.com