I've become somewhat of a curator of plastic bags. In fact, there are some doors you shouldn't open in my house because you will be buried under an avalanche of interesting plastic. Primarily, I fuse these bags into collages and turn them into other things like: BEADS.

If you would like to transform your own collection of plastic bags into beads, follow these instructions:

Materials

Clean plastic bag

Parchment paper

Iron

E6000 or similar glue

Toothpicks

Scissors

Ruler

Fusing the Plastic

Place two layers of plastic between two sheets of parchment on a hard surface and iron them together using a low setting with the steam set to off.

That will leave you with a sheet that looks like this:

Making the Bead

Cut out a triangular shape that is about 4 inches long and 1/2 inch wide at the bottom. You can play around with the sizing. The wider the triangle, the longer the bead and the longer the triangle, the fatter the bead.

With a toothpick, apply a thin layer of E6000 or similar glue to one side of your triangle. Leave a small strip free of glue at the base of the triangle. Place a clean toothpick at the base and roll up the triangle around the toothpick so it shapes an oval bead. Jiggle the toothpick a little to make sure that it doesn't stick to the bead.

Leave the toothpick in the bead and stick it into something to dry overnight. I used a dried out bit of Model Magic clay, but any kind of Styrofoam, etc. will work as well.

Once your bead is dry you can lacquer it or leave it as is and use it in a project like this:

or this:

Happy Recycling!

Simone
groundsel.etsy.com